|
Unlocking Instructions
How to Enter Unlock Codes
on All Blackberry Phones:
0 Attempts Remaining: If the phone shows '0', your phone has already been hardlocked and cannot
be unlocked by code. Even if you correctly enter the code, phone will still say "Code Error, Please Wait...".
How to Enter Unlock Codes on BlackBerry Bold (9000), 8800, 8820, Curve (8300, 8310, 8320), Javelin (8900),
Gemini (8520, 9300), & Onyx (9700), Torch 9800, Pearl 9100 3G:
Note: NO SIM is needed to unlock the
phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted
to use the new SIM card.
1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
7)
It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!
How to Enter Unlock Codes on BlackBerry Pearl (8100, 8110, 8120, 8220):
Note: Remove any SIM that
is currently in the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone
MUST be restarted to use the new SIM card.
1) Power on
2) Go to Settings
3) Go to Options
4) Go
to Advanced Options
5) Go to Sim Card
6) HOLD ALT (Left side Below @) and press: mepp2 (Please note that you will
NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm
and your phone is unlocked!
How to Enter Unlock Codes on BlackBerry 8830:
Note: SIM
is REQUIRED to unlock the phone. SIM card can be inactive, doesn't need to active. After phone is unlocked, remove the battery,
insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
No AT&T/T-mobile
Usage: This is a dual-band phone, it will NOT work in North America but will work fine in Europe, Asia, South America where
they use the other set of frequencies.
1) Power on
2) Go to Settings
3) Go to Options
4) Go to
Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mep2 (Please note that you will NOT see what you type
on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is
unlocked!
Exception: If phone says Code Error and the attempts stay the same, start off with 10 attempts and still says
10 attempts after enter code, then continue with instructions, this is just a glitch on the phone.
How to Enter
Unlock Codes on BlackBerry 8700/8700c/8700g:
Note: SIM is REQUIRED to unlock the phone. SIM card
can be inactive, doesn't need to active. After phone is unlocked, remove the battery, insert SIM as desired and re-insert
the battery. Phone MUST be restarted to use the new SIM card.
1) Power on
2) Go to Settings
3) Go to
Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mepe (Please note that you will
NOT see what you type on the screen)
6) It will ask you for the unlock code. Enter it and then press jog dial to confirm
and your phone is unlocked!
How to Enter Unlock Codes on BlackBerry 7105t:
Note:
SIM is REQUIRED to unlock the phone. SIM card can be inactive, doesn't need to active. After phone is unlocked, remove the
battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
1) Power
phone on and turn off the radio (Turn Wireless Off option)
2) Go to Tools
3) Go to Settings
4) Go to Options
and select Advanced Options
5) Go to SIM Card
6) Type "MEPPD" (please note that you will not see what
you type on the screen)
7) HOLD ALT and press mepp2
8) Enter the Unlock Code
9) Press enter (press on Trackball)
10) Reboot device. Device is now unlocked
How to Enter Unlock Codes on BlackBerry 7100/7130/7130c:
Note: Remove any SIM that is currently in the phone. After phone is unlocked, remove the battery, insert
SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
1) Power on
2)
Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT (Left side Below
@) and press: mepp2 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock
code. Enter it and then press trackball to confirm and your phone is unlocked!
How to Enter Unlock Codes
on Blackberry 5xxx, 6xxx, 7xxx (Except for 7100):
Note: After phone is unlocked, remove the battery,
insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
1) Power on
2)
Go to Options.
3) Scroll to SIM CARD then press jog dial in once to select it
4) HOLD ALT (Half moon key on the
lower left side) and press: mepe (Please note that you will NOT see what you type on the screen)
5) It will ask you for
the unlock code. Enter it and then press jog dial once to confirm and your phone is unlocked!
How to Enter
Unlock Codes on Blackberry Vodafone Storm 9500:
1) Turn off the phone
2) Need a SIM card inserted
into the phone (Example: Verizon, At&t, T-mobile)
3) Turn on the phone
4) Go to Settings (Button that has dots
next to green call button), Click on Manage Connections, Select 'Turn All Connections Off'
5) Press End Call (Red button)
6) Go to Settings, then Options, then Advanced Options, then SIM Card 7) Hit the Settings Button (Button that has dots next
to green call button) and select 'Show Keyboard'
8) Type in mepd (Please note that you will NOT see what you type on
the screen)
9) Type in mep2 or mepp2 and another screen will pop-up prompting for the MEP code (Please note that you
will NOT see what you type on the screen)
10) Enter the code, Remember you ONLY have 10 chances to get it right
11)
Press enter and your phone is unlocked!
How to Enter Unlock Codes on BlackBerry Storm 9530 & 9550:
1) Turn off the phone
2) Need a SIM card inserted into the phone (Example: Verizon, At&t, T-mobile)
3) Turn on the phone
4) Go to Settings (Button that has dots next to green call button), Click on Manage Connections,
Select 'Turn All Connections Off'
5) Press End Call (Red button)
6) Inside Settings menu, Click Options, then Mobile
Network, on the switch technology to 'Global' if that has not been done.
Exception: If phone prompts 'Would you like
your Blackberry to automatically select CDMA or GSM based on network availability', select No.
7) Now click the Back
Arrow Button (Next to the Red End Call button) and select Advanced Options and then SIM Card
8) Hit the Settings Button
(Button that has dots next to green call button) and select 'Show Keyboard'
9) Type in mep2 or mepp2 and another screen
will pop-up prompting for the MEP code (Please note that you will NOT see what you type on the screen)
Exception: If
nothing is prompting up and you are making sure you are selecting each button by press the screen in, do a wipe handheld to
reset the phone to manufacturer default: http://forums.crackberry.com/showthread.php?t=110075
10) Enter the code, Remember
you ONLY have 10 chances to get it right
Exception: If phone says Code Error and the attempts stay the same, start off
with 10 attempts and still says 10 attempts after enter code, then continue with instructions, this is a glitch on the phone
11) Press the Enter key (Button that looks like a backwards L arrow)
12) A message will appear saying Code Accepted
13) Turn device off by removing battery, insert SIM of your choice if have not done so already. Turning device is necessary
even if you have SIM of choice inserted.
14) Turn the phone back on
15) Go to Settings, then Options, then Mobile
Network, on the third row switch Network Technology to GSM/UMTS.
16) Press the Back Arrow Button to exit and save settings.
17) Return to the main screen by pressing End Call and you should see your phone getting signal
18) As a reminder,
if you ever remove the SIM card from your phone, you will need to set the Network Technology as GSM/UMTS again
Issues:
1) If you have issues with the phone not recognizing the network, make sure the radio is on by making
sure it is not low on power.
2) If you follow the above instructions and code is accepted with the Network Technology
set to GSM/UMTS and still not working, it may be the SIM needs to be replaced with a newer SIM Card.
Removing "Activation
Required" on the screen or changing the Phone Number:
1) On the main screen of the phone, press Call (Green Button)
2) Type on the screen: ##000000
3) Press the Call Button
4) For the Mobile Directory Number, put in your phone
number in there
5) After you have done that, press the Menu Button to Save the options and the phone will automatically
restart
6) After restarting, it will be updated
<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->
How to Enter Unlock Codes on BlackBerry Tour (9630):
1) Turn off the phone
2) Need a SIM
card inserted into the phone (Example: Verizon, At&t, T-mobile)
3) Turn on the phone
4) Go to Settings
5)
Go to Options
6) Go to Advanced Options
7) Go to Sim Card
8) HOLD ALT and press: mep2 (Please note that you
will NOT see what you type on the screen)
9) Enter the code, Remember you ONLY have 10 chances to get it right
10)
Enter it and then press trackball to confirm and your phone is unlocked!
11) A message will appear saying Code Accepted
12) Turn device off by removing battery, insert SIM of your choice if have not done so already. Turning device is necessary
even if you have SIM of choice inserted.
13) Turn the phone back on
14) Go to Settings, then Manage Connections,
then Mobile Network Options and set the Network Technology to GSM/UMTS.
15) Set Network Mode to 3G & 2G.
16)
Press the Back Arrow Button once to exit and save settings.
17) Inside the Manage Connections, set Mobile Network to
on.
18) Return to the main screen by pressing End Call and you should see your phone getting signal
19) As a reminder,
if you ever remove the SIM card from your phone, you will need to set the Network Technology as GSM/UMTS again
Issues:
1) If you have issues with the phone not recognizing the network, make sure the radio is on
by making sure it is not low on power.
2) If you follow the above instructions and code is accepted with the Network
Technology set to GSM/UMTS and still not working, it may be the SIM needs to be replaced with a newer SIM Card.
VERIZON
TOURS ONLY: Removing "Activation Required" on the screen or changing the Phone Number:
1) On the main screen
of the phone, press Call (Green Button)
2) Type on the screen: ##000000
3) Press the Call Button
4) For the
Mobile Directory Number, put in your phone number in there
5) After you have done that, press the Menu Button to Save
the options and the phone will automatically restart
6) After restarting, it will be updated
SPRINT
TOURS: If you need to remove the Activation Required, you will need to get the MSL code to remove it. Contact me on costs.
<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->
How to Enter
MSL Code on Sprint BlackBerry Tour (9630):
1) From the mainscreen of the BlackBerry, press the green
call button to enter the phone
2) Type in ##MSLCODE then the green talk button (ie: ##123456 Green talk button)
3)
In the CDMA service edit screen, delete the number in the first row (000000xxxx) and replace it with your current phone number
4) Press the menu key and choose save
5) The device will re-boot
6) When the device re-boots, Activation Required
will be gone and the active carrier name will now appear
How to Enter Unlock Codes for HP
phones:
How to Enter Unlock
Codes on HP 6500, 6510, 6515, 6945, HW6510, HW6515, HW6920, HW6925:
1) Insert NON Cingular SIM into device
2) Power on the device
- Wait approximately 30 seconds until the SimLock
application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)
3) Enter
the unlock code in the blank field
4) Press Ok
- If the unlock code is incorrect, an error dialog will appear.
After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information)
- If the unlock code is correct, a success dialog will appear.
5) Press Ok
How to Enter Unlock Codes for HP phones(including G1 & G2):
How to Enter Unlock Codes on G1, G2, 2125, 3125, 8100, 8125, 8525, 8900/8925 (Tilt), P4600 (Fuze), Dash,
Dash 3G, Wing, Shadow, Excalibur 100, MDA, SDA, Touch Pro 2 (TP2), myTouch 3G, Magic:
1) Power on with Non-allowed SIM card
2) Enter unlock code when prompted
3) Enter code using the ON-SCREEN
keyboard (This is if the screen HAS an ON-SCREEN keyboard) when unlocking a Pocket PC Phones
4) Press Ok
5) Phone
Unlocked
Problems with bypassing G1 GMail account: This link provides information on how to
bypass the login if are having issues when trying to use your phone with AT&T: Set-up AT&T on G1.
How
to Enter Unlock Codes on HTC Ozone:
1) Power on
2) Go to Settings
3) Go to Phone
4)
Go to Network
5) Put phone on GSM mode
6) Go to Security
7) Go to Select SIM Manager
8) Go to unlock
SIM
9) Phone will prompt for a code, enter the unlock code and press OK
How to Enter Unlock Codes on All
LG Phones:
How to Enter Unlock Code
on LG CU320:
1) Power on the handset
2) In Idle screen, input
the special code "277634#*#".
3) Enter the SIM Unlock code
4) Access the submenu "SIM Test"
in Phone Test Mode.
5) Input the special code "2945#*#".
6) Access the submenu "SIM Unlock"
which is just activated after the special code.
7) Input the 8-digit Unlock code in the "Enter unlock code"
input screen.
8) It will be unlocked.
How to Enter Unlock Code on LG CU400/CU405:
1) Insert non-Cingular SIM card"
2) Power on the handset - Phone will display "Invalid SmartChip".
3) Enter 159753#*#
4) Enter the 8 digit SIM Unlock code
5) Select "OK".
6) The handset will
be unlocked.
How to Enter Unlock Code on LG CU500:
1) Insert non-Cingular SIM
card.
2) Power on the handset. Phone will display "Invalid SmartChip"
3) (IF THE PHONE DOES NOT DISPLAY
INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN)
4) In Idle screen, enter 159753#*#. Phone will display "Enter
NCK, Remaining 5
5) Enter the 8 digit SIM unlock code
6) Select "OK"
7) The handset is now successfully
unlocked.
How to Enter Unlock Code on LG CU515:
1) Insert non-Cingular SIM
card
2) Power on the handset - Phone will display "Invalid SmartChip".
3) Enter *#865625# then select
option 1 and then again select 1
4) Enter the 16 digit SIM Unlock code
5) Device should say: Network Lock Deactivated
6) The handset is unlocked.
How to Enter Unlock Code on LG CU575 (Trax):
1) Put a non-Cingular
sim in the phone
2) Phone says invalid smart chip
3) Now enter *#865625# then select option 1 and then again select
1
4) Enter your 16 digits code
5) Device should say: Network Lock Deactivated
6) The handset is unlocked.
How to Enter Unlock Code on LG CU720/TU720 (Shine):
1) Insert At&t SIM card
2)
Power on the handset
3) Type *#865625#
4) the phone will ask you to input the unlock code twice, just input the
unlock code
5) Device is now unlocked
If Above does not work
Try using a
non-allowed SIM card (SIM that didn't come with the phone) and do the same steps for 2, 3, 4 & 5.
How to Enter Unlock
Code on LG CU915/CU920 (Vu):
1) Insert At&t SIM card
2) Power on the handset
3) Type
*#865625#CODE (CODE is the code we provided you)
How to Enter Unlock Code on LG C2000:
1) Insert non-Cingular SIM card
2) Power on the handset - phone will display "phone restricted"
3) Select "Cancel" - phone will display "phone restriction code"
4) Enter the SIM Unlock code
5) Select "OK" - the handset is now successfully unlocked
How to Enter Unlock Code on LG CT810
(Incite):
1) Dial this into the LG Incite's phone menu
2) 2945#*810#
3) Press CALL.
4) It should you ask you for the code.
How to Enter Unlock Code on LG CB630 (Invision):
1) Insert an AT&T or Cingular SIM in the phone; it does not have to be an active SIM
2) Dial this into
the LG Incite's phone menu
3) *#865625#
4) Press CALL.
5) It should you ask you for the code.
How to Enter Unlock Code on LG GR500 (Xenon):
1) Turn on the phone to the main screen (no
SIM needed)
2) Dial this into the LG Incite's phone menu
3) *#865625#
4) Press CALL.
5) It should
you ask you for the code.
How to Enter Unlock Code on LG GT365 (Neon):
1) Turn on the phone
to the main screen (have a non-allowed SIM inserted, its needed)
2) Dial this into the LG Incite's phone menu
3) *#865625#
4) Press CALL.
5) It should you ask you for the code.
How to Enter Unlock
Code on LG KE970 (Shine):
1) Switch ON your phone with an allowed SIM card
2) Then compose: 2945#*9701#
3) Press CALL.
4) It should you ask you for the code.
How to Enter Unlock Code on LG TU500:
1) Insert an Invalid SimCard
2) When 'invalid smartcard' appears, compose: 2945#*9701#
3) Press CALL.
4) It should you ask you for the code.
How to Unlock LG (Other models not listed, Example:CE110, CF360, CG180, CG225, C1300,
C1300i, C1500):
1) Insert not-allowed SIM card
2) Power on the handset- phone will display "phone
restricted"
3) Select "Cancel" - phone will display "phone restriction code"
4) Enter
the SIM unlock code
5) Select "OK" - the handset is now successfully unlocked
How to Enter Unlock Codes on All
Motorola phones: How to Enter Unlock Codes on C139, v190, v3, v3i, v3r, v3re, v3xx, RAZR, RAZR 2, K1 (KRZR),
K2 (KRZR2), VA76r (Tundra), v6, v8, v9, v9x, S9, SLVR, SLVR 2, c168/c168i, L2, L6, L7, Q/Q9H, MPX220, W233, Z3, Z6, Z9 &
any other Motorola Phone:
1) Switch ON your phone with a not allowed SIM Card
2) Phone should show 'Enter Special or Subsidy Code',
3) Enter unlock code
4) Your phone is now unlocked.
WARNING: if any of these messages appear
:
- "Contact Service Provider"
- or "Tamper Alter"
- or "Wait Before Enter Special
Code"
- or "Contact Service'
It's because you or somebody else has already entered too
many wrong codes. You just have to leave the phone ON on the error message and after 1hr - 8hrs the message "Enter Special
Code" will appear again!
Issues with Q700 Motorola Slide Unlock Codes
If receive
message: "WAITING FOR ACTIVATION A welcome screen will appear within 48 hours after purchase. If does not, call Custumer
Care to check your account status. Until then, press menu to place emergency calls," you will need to press menu and
the letter "L" at the same time, and the phone will be working.
How to Enter Unlock Codes on All
Nokia phones:
*** please read instructions carefully before
starting! *** 1. Switch ON
your phone without SIM Card 2. Compose #pw+unlockcode+1# ("unlockcode"
is meant to be the actual unlock code we gave you) ie. if your code is 000000000000000
then enter exactly: #pw+000000000000000+1#
*** IF THE CODE IS REJECTED, DO NOT
TRY AGAIN. ***
The letter P appears after you quickly press 3 times the button star ( * )
The letter W appears after you quickly press 4 times the button star ( * )
The letter + appears after you quickly
press 2 times the button star ( * )
The phone shows "SIM Restriction Off" and is unlocked!
IF YOU HAVE TRIED TO PUT IN AN INCORRECT
CODE 3 OR MORE TIMES PREVIOUSLY & YOU WILL GET PHONE 1 OF THESE ERROR MESSAGES "CANNOT UNDO RESTRICTION"
OR "NOT ALLOWED" OR "PHONE RESTRICTED", THEN YOUR DEVICE IS HARD LOCKED
AND THE HARDLOCKED MUST BE REMOVE BEFORE YOU CAN INPUT THE UNLOCK CODE AGAIN. PLEASE CONTACT US FOR MORE INFORMATION
ON HOW TO REMOVE THE HARDLOCKED.
How to Enter Unlock Codes for Pantech phones:
How to Enter Unlock Codes
on C3, C3B, C120, C530 (Slate), C610, C630, C810 (Duo), C820 (Matrix Pro):
1) Power on with Non-allowed SIM card
2) Enter unlock code when prompted
3) Enter code using the ON-SCREEN
keyboard (This is if the screen HAS an ON-SCREEN keyboard) when unlocking a Pocket PC Phones
4) Press Ok
5) Phone
Unlocked
ISSUE PANTECH DUO (C810): Many times you may face an issue saying "This phone
only accepts SIMs from specific networks, and has been blocked. Contact your customer service center for the unblock code.
Unblock code:
___________
New pin:
___________
Confirm new pin:
___________"
If you get this message, the issue is that your phone needs to have the newest Windows Mobile 6.1 installed. You can get
this from here: Pantech Duo WM6.1 Update
How
to Enter Unlock Codes on C150, C520 (Breeze), C740:
1) Put AT&T SIM card in C740
2) Turn on
3) Enter *#865625# on idle screen
4) SIM Unlock Process - Click Yes.
5) Enter 8 digits unlock code and click
OK (soft key)
6) Re-enter the unlock code.
7) Unlock Process Complete
8) Click OK (soft key)
How to Enter Unlock Codes on All
Samsung Phones: NOTE:
If you enter a code and it shows 'Phone Freeze', this means the phone has been hard locked due to the number of wrong attempts.
If you need the unFreeze Codes, please contact us on prices.
How
to Enter 'Phone Freeze' Codes
1) With wrong sim enter 8 digit freeze
code press ok button
2) Then enter network unlock code
Do NOT use: #7465625*638*code#
How to Enter Unlock Codes on a BlackJack (i607/i617), Jack i637, or Samsung T939 (Behold 2)
1) Power on with Incorrect SIM
2) Phone will prompt for Network Pin
3) Use Code provided and press OK
ERROR MESSAGE: WRONG PASSWORD or INVALID CODE - If you receive one of these messages when entering
the code for the Blackjack, the phone is likely to be refurbished. In cases like these, unlocking of the phone by code cannot
be done, only by machine. Many cell phone shops do carry hardware devices (NsPro Box) to remove the unlock from the phones.
NOTE: If you are unable to connect to service provider or unable to make out going calls or recieve messages,
this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can
be done as follows:
1) Power on your Phone
2) Enter *#1546792*#
3) Select Option 3 Network & Call Settings
4) Select option 5 Network Mode
5) Select GSM
How to Enter Unlock Codes on a Samsung A117, A137, A167,
A177, A237, A257 (Magnet), A436, A437, A517, A637, A657, A707, A717, A727, A737, A747 (SLM), A757, A767 (Propel), A777, A787,
A817, A827 (Access), A837 (Rugby), A867 (Eternity), A877 (Impression), A887 (Sostice), C417, i907 (Epix), X497, ZX10, ZX20,
T219, T229, T239, T309, T319, T339, T429, T459 (Gravity), T469 (Gravity 2), T609, T639, T729 (Blast), T739, T749 (Highlight),
T819, T919 (Behold), T929 (Memoir)
1) Power on without SIM card
2) Compose: #7465625*638*CODE#
(by "CODE" I mean the unlock code I gave you)
Not Yet Personalized - If you see this
message, it is another way of saying the phone is already unlocked.
How to Enter Unlock Codes on a A127,
P777, D307, D357, D407, D807, T539 (Beat), T629, Z105 and Z107:
1) Power on without SIM card
2)
Compose: #0111*CODE# (by "CODE" I mean the unlock code I gave you)
Not Yet Personalized - If
you see this message, it is another way of saying the phone is already unlocked.
How to Enter Unlock Codes on Samsung (all other
models):
1) Switch ON your phone with a not accepted SIM card
2) Phone will ask for the "Password"
3) You can now enter the unlock code
Not Yet Personalized - If you see this message, it is
another way of saying the phone is already unlocked.
How to Enter Unlock Code for All Sierra Wireless Aircard: How to Enter Unlock Codes on Aircard 860, 875, 875u, 881, 881u, 885,
885u: Please
download and install Sierra Watcher at the link below if you don't have it yet... http://www.sierrawireless.com/support/show_support_and_downloads.aspx?id=4,5,1,1 Once you have Watcher installed,
put in a Non-AT&T Cingular SIM into the card and Watcher will prompt you to enter the unlock code. Please make sure to
enter the unlock code correctly.
How to Enter Unlock Codes on All
Sony Ericsson Phones: If
your phone has a "JOGDIAL" (for example SonyEricsson K700i), then you must press the "down arrow" instead
of the "left arrow" for step 3 & 5. By "Down Arrow" I mean directing the Jogdial down!
How to Enter Unlock Codes on Sony Ericsson Cell Phones (Most models):
1) For the unlocking of
a locked Sony Ericsson no sim card is required.
2) Turn on the handset. Display will indicate 'Insert SIM.'
3)
Press the left Arrow (<) button.
4) Press the star (*) button twice.
5) Press the left Arrow (<) button
again.
6) You will briefly see one of the following messages listed on devices display: 'Personalized with MNC2' or
'Personalized with MNC3'.
7) Wait approximately three seconds.
8) The display will indicate 'Network' and a picture
of a closed lock.
9) Press Select.
10) The display will indicate 'Unlock (Net) 5' and 'NCK:'
11) Enter the
16 digit NLCK4U code (unlock code we provided you) and press okay.
12) The handset will display 'Network unlocked' and
the display 'Insert SIM' appears.
13) The handset is successfully unlocked.
NOTE:
1) When
doing the first 5 Steps, you need to do it fast.
2) If you get NCK: (0), this means the phone is hard locked. The phone
cannot be unlocked since there have been more than 5 wrong attempts.
3) If you have tried a few times and are getting
'Not Allowed', your phone cannot unlock due to too many wrong attempts made on the phone. Phone has been hardlocked.
How to Enter Unlock Codes on TM506 & Equinox TM717
1) Insert a T-Mobile SIM into
the device.
2) From the main screen, press the Navigation key left.
3) Press the Star * key.
4) Press the
Star * key again.
5) Press the Navigation key left.
6) The handset displays Network Locked.
7) Select OK.
8) Enter the 16 digit SIM subsidy unlock code.
9) Select OK.
How to Enter Unlock Codes on All
Treo/ PalmOne Phones: How to Enter Unlock Codes on Treo 650, 680, Centro:
1) Remove
Treo battery, unplug cable
2) Insert incorrect a not allowed SIM card (one the phone does not accept)
3) Power
on your Treo, 'Sim not allowed' is displayed, click OK
4) Go to the dial pad, and use the stylus to enter code *#*#CODE#.
Then press 'Dial'. (substitute the word "code" with the unlock code we gave you).
5) Phone will reset and
display 'sim lock removed'
Ensure you enter the codes in this manner *#*#CODE# (e.g. *#*#12345678#)
Troubleshooting
Error Message: "The SIM Lock has NOT been removed from this phone"
Solution 1: Please make sure you are entering the correct code and enter it using this method *#*#CODE# dial
Solution
2: If the phone says that the SIM lock has not been removed, ensure that the phone radio (wireless mode) is on.
If still having the error message "The SIM Lock has NOT been removed from this phone," the phone is likely
refurbished and cannot unlock by code. Refurbished phones from the manufacturer are reflashed and take on a new IMEI. Because
of this, the only way to unlock the phones is by software unlocking the phone.
How to Enter
Unlock Codes on Treo 750:
1) Power on with incorrect sim, enter unlock code when prompted
2)
Enter code using ON-SCREEN (NOT physical keys) keyboard when unlocking a Pocket PC Phones
If above doesn't work
Wait for the next timout to complete. Then HOLD the white key button on the far left of the keyboard and then enter
the unlock code with the PHYSICAL keys, not On-Screen.
How to Enter Unlock Code for AT&T
Quickfire: How to Enter Unlock Codes on UTStarcom (all models):
1) Insert AT&T SIM card into phone
2) From the phone pad dial *#865625# and it will prompt for the code.
|
